The SwitchBot Hub Mini is a Matter device (Vendor 0x1397, Product 0x07E8) with 349 endpoints.

Last updated 17 Sep 2026

Hub Mini

SwitchBot

Vendor ID: 5015

Product ID: 2024

Seen: 2,376 times

No Binding Wifi

CSA Certification:

Certified Sep 26, 2023 CSA23C24MAT41734-24 vv1.0

What This Device Can Do

★ ☆ ☆ ☆ ☆ 2% of features

Controls
💡 On/Off control	v1.0	✕
🔆 Brightness dimming	v1.1	✕
🎨 Color temperature	v1.1	✕
🌈 Full color (RGB)	v1.1	✕
🌀 Fan speed control	v1.1	✕
🪟 Blinds/shades control	v1.0	✕
🔒 Lock/unlock	v1.0	✕
🌡️ Temperature setpoint	v1.0	✕
💧 Pump control	v1.0	✕
🚰 Valve control	v1.3	✕

Sensors
🌡️ Temperature sensor	v1.0	✕
💧 Humidity sensor	v1.0	✕
👁️ Occupancy/motion sensor	v1.1	✕
☀️ Light level sensor	v1.0	✕
🚪 Open/close sensor	v1.0	✕
📊 Pressure sensor	v1.0	✕
🌊 Flow sensor	v1.0	✕
🌿 Air quality sensor	v1.2	✕
🔥 Smoke detector	v1.2	✕
⚠️ Carbon monoxide detector	v1.2	✕

Automation & Scenes
🎬 Scenes & presets	v1.3	✕
👥 Group control	v1.1	✕
🔗 Device-to-device control	v1.0	✕
▶️ Automation actions	v1.0	✕
🎚️ Operating modes	v1.0	✕
⏰ Scheduling	v1.0	✕
👁️ Responds to occupancy	v1.1	✕

Info & Monitoring
▶ 📊 Device diagnostics	v1.0	✓
General Diagnostics What you can do: ✓ Trigger test event ✓ Time snapshot ✕ Time snapshot response ✕ Payload test request optional ✕ Payload test response optional Information available: ✓ Network interface information ✓ Number of reboots ✓ Time since last restart ✕ Total operational hours optional ✕ Boot reason optional ✕ Active hardware faults optional ✕ Active radio faults optional ✕ Active network faults optional ✓ Active hardware faults ✕ Active network faults optional
⚡ Energy monitoring	v1.3	✕
🔋 Battery status	v1.0	✕
⬇️ Firmware updates	v1.0	✕

Comfort & Climate
🔥 Heating	v1.0	✕
❄️ Cooling	v1.0	✕
🔄 Auto heat/cool	v1.0	✕
📌 Temperature presets	v1.0	✕
💧 Humidity control	v1.1	✕
🌿 Air purification	v1.2	✕

Security
🔢 PIN code access	v1.0	✕
💳 RFID/card access	v1.0	✕
👤 User management	v1.0	✕

Media & Entertainment
▶️ Media playback	v1.0	✕
🔊 Volume control	v1.0	✕
📺 Channel selection	v1.0	✕
🔌 Input selection	v1.0	✕
📲 Casting/streaming	v1.0	✕

⚠ Not available: Device-to-device control, Energy monitoring

Setup & Reset Info

▼

Setup: Manual Control Reset:

Initial Setup:

15,1

Factory Reset:

15,1

Setup Guide

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Temperature Measurement (5 devices)

Eve Thermo (Eve Systems) Eve Thermo (Eve Systems) Touchscreen Switch S100 (Aqara) Matter Thermostat (riddix) Eve Thermostat (Eve Systems)

Relative Humidity Measurement (1 device)

Touchscreen Switch S100 (Aqara)

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Temperature Sensor Matter 1.0 Compliant

Feature Score:

70%

Extra (Beyond Spec) 1

Descriptor

2/2 required | 0/0 optional

Humidity Sensor Matter 1.0 Compliant

Feature Score:

70%

Extra (Beyond Spec) 1

Descriptor

2/2 required | 0/0 optional

Frequently Paired With Found in 33 installations

These devices are commonly found together in the same smart home setup based on anonymous telemetry data.

ALPSTUGA air quality monitor IKEA of Sweden

13 shared 39.4% of installs

Aqara Door and Window Sensor P2 Aqara

11 shared 33.3% of installs

BILRESA dual button IKEA of Sweden

9 shared 27.3% of installs

MYGGSPRAY wrlss mtn sensor IKEA of Sweden

8 shared 24.2% of installs

SwitchBot Hub SwitchBot

7 shared 21.2% of installs

MYGGBETT door/window sensor IKEA of Sweden

7 shared 21.2% of installs

GRILLPLATS plug IKEA of Sweden

7 shared 21.2% of installs

Lafaer Wireless Radar Occupancy Sensor GL Technologies

6 shared 18.2% of installs

Endpoints by Version