The xCREAS Air purifier lite is a Matter device (Vendor 0x156A, Product 0x0032) with 2 endpoints.

Last updated 14 Feb 2026

Air purifier lite (PID 0x0032)

★ ★ ★ ★ ☆ ☆ (73%)

xCREAS

Vendor ID: 5482

Product ID: 50

Seen: 3 times

Controls devices directly Group control Wifi

CSA Certification:

Certified Jan 17, 2025 CSA25031MAT44931-24 v1.0.0

What This Device Can Do

★ ★ ★ ★★ ☆ 18% of features

Controls
▶ 🌀 Fan speed control	v1.1	✓
Fan Control What you can do: ✓ Adjust fan speed by one step Information available: ✓ Current fan mode (off/low/medium/high/auto) ✓ Fan mode sequence ✓ Target speed percentage ✓ Current speed percentage ✓ Speed max ✓ Speed setting ✓ Speed current ✕ Rock support optional ✕ Rock setting optional ✓ Wind support ✓ Wind setting ✕ Airflow direction optional Enabled features: MultiSpeed Auto Wind Step
💡 On/Off control	v1.0	✕
🔆 Brightness dimming	v1.1	✕
🎨 Color temperature	v1.1	✕
🌈 Full color (RGB)	v1.1	✕
🪟 Blinds/shades control	v1.0	✕
🔒 Lock/unlock	v1.0	✕
🌡️ Temperature setpoint	v1.0	✕
💧 Pump control	v1.0	✕
🚰 Valve control	v1.3	✕

Sensors
▶ 🌿 Air quality sensor	v1.2	✓
Air Quality Information available: ✓ Overall air quality level (good/fair/poor) Enabled features: Fair Moderate VeryPoor ExtremelyPoor
🌡️ Temperature sensor	v1.0	✕
💧 Humidity sensor	v1.0	✕
👁️ Occupancy/motion sensor	v1.1	✕
☀️ Light level sensor	v1.0	✕
🚪 Open/close sensor	v1.0	✕
📊 Pressure sensor	v1.0	✕
🌊 Flow sensor	v1.0	✕
🔥 Smoke detector	v1.2	✕
⚠️ Carbon monoxide detector	v1.2	✕

Automation & Scenes
▶ 👥 Group control	v1.1	✓
Groups What you can do: ✓ Add device to a group ✓ Add device to a group ✓ Check group membership ✓ Check group membership ✓ Get group membership ✓ Get group membership response ✓ Remove device from a group ✓ Remove device from a group ✓ Remove from all groups ✓ Add group if identifying Information available: ✓ Supports named groups Enabled features: GroupNames
▶ 🔗 Device-to-device control	v1.0	✓
Binding Information available: ✓ List of bound devices
🎬 Scenes & presets	v1.3	✕
▶️ Automation actions	v1.0	✕
🎚️ Operating modes	v1.0	✕
⏰ Scheduling	v1.0	✕
👁️ Responds to occupancy	v1.1	✕

Info & Monitoring
▶ 📊 Device diagnostics	v1.0	✓
General Diagnostics What you can do: ✓ Trigger test event ✓ Time snapshot ✕ Time snapshot response ✕ Payload test request optional ✕ Payload test response optional Information available: ✓ Network interface information ✓ Number of reboots ✓ Time since last restart ✕ Total operational hours optional ✓ Boot reason ✓ Active hardware faults ✓ Active radio faults ✓ Active network faults ✓ Active hardware faults ✕ Active network faults optional
▶ ⬇️ Firmware updates	v1.0	✓
OTA Software Update Requestor What you can do: ✓ Request firmware update check Information available: ✓ Default ota providers ✓ Update available ✓ Current update state ✓ Update progress percentage
⚡ Energy monitoring	v1.3	✕
🔋 Battery status	v1.0	✕

Comfort & Climate
▶ 💧 Humidity control	v1.1	✓
Fan Control What you can do: ✓ Step Information available: ✓ Current fan mode ✓ Fan mode sequence ✓ Percent setting ✓ Percent current ✓ Speed max ✓ Speed setting ✓ Speed current ✕ Rock support optional ✕ Rock setting optional ✓ Wind support ✓ Wind setting ✕ Airflow direction optional Enabled features: MultiSpeed Auto Wind Step
▶ 🌿 Air purification	v1.2	✓
HEPA Filter Monitoring What you can do: ✓ Reset filter replacement reminder Information available: ✓ Filter condition (0-100%) ✓ Whether condition increases or decreases ✓ Filter change needed indicator ✓ In place indicator ✓ Last changed time ✓ Replacement product list Enabled features: Condition Warning ReplacementProductList
🔥 Heating	v1.0	✕
❄️ Cooling	v1.0	✕
🔄 Auto heat/cool	v1.0	✕
📌 Temperature presets	v1.0	✕

Security
🔢 PIN code access	v1.0	✕
💳 RFID/card access	v1.0	✕
👤 User management	v1.0	✕

Media & Entertainment
▶️ Media playback	v1.0	✕
🔊 Volume control	v1.0	✕
📺 Channel selection	v1.0	✕
🔌 Input selection	v1.0	✕
📲 Casting/streaming	v1.0	✕

✨ Standout: Device-to-device control, Air quality sensor

⚠ Not available: Energy monitoring

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Fan Control (2 devices)

Matter Thread Fan Switch VTM35-SN (Inovelli) Touchscreen Switch S100 (Aqara)

Endpoints by Version

Hardware: 1.0

SW: 1.0 Latest Seen 2 endpoints

Endpoint 0

Has Binding Cluster

Device Types

Server Clusters (hover for details)✓ Rich data

Endpoint 1

Device Types

Server Clusters (hover for details)✓ Rich data

Known Versions

Hardware Version	Software Version	Count	First Seen	Last Seen
1.0	1.0	3	2026-02-14 14:40:20	2026-02-14 14:45:20

« Back to device index

Air purifier lite (PID 0x0032)

What This Device Can Do

What you can do:

Information available:

Enabled features:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

Information available:

What you can do:

Information available:

What you can do:

Information available:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

Technical Details For developers

Device Compatibility

Fan Control (2 devices)

Endpoints by Version

Hardware: 1.0

Endpoint 0

Descriptor

Binding

Access Control

Basic Information

OTA Software Update Provider

OTA Software Update Requestor

Localization Configuration

Time Format Localization

Unit Localization

General Commissioning

Network Commissioning

General Diagnostics

Software Diagnostics

Wi-Fi Network Diagnostics

Administrator Commissioning

Operational Credentials

Group Key Management

Endpoint 1

Identify

Groups

Descriptor

Fixed Label

User Label

Air Quality

HEPA Filter Monitoring

Fan Control

PM2.5 Concentration Measurement

Known Versions