The Plomer Automatic Water Dispenser MoT is a Matter device (Vendor 0xFFF1, Product 0x8011) with 2 endpoints.
Automatic Water Dispenser MoT
Vendor ID:
65521
Product ID:
32785
Seen:
2 times
No Binding
This device cannot directly control other devices. It can only be controlled by a hub or controller.
Thread
What This Device Can Do
11% of features
| Controls | ||
|---|---|---|
| 💡 On/Off control | v1.0 | ✓ |
| 💧 Pump control | v1.0 | ✓ |
| 🔆 Brightness dimming | v1.1 | ✕ |
| 🎨 Color temperature | v1.1 | ✕ |
| 🌈 Full color (RGB) | v1.1 | ✕ |
| 🌀 Fan speed control | v1.1 | ✕ |
| 🪟 Blinds/shades control | v1.0 | ✕ |
| 🔒 Lock/unlock | v1.0 | ✕ |
| 🌡️ Temperature setpoint | v1.0 | ✕ |
| 🚰 Valve control | v1.3 | ✕ |
| Sensors | ||
|---|---|---|
| 🌡️ Temperature sensor | v1.0 | ✕ |
| 💧 Humidity sensor | v1.0 | ✕ |
| 👁️ Occupancy/motion sensor | v1.1 | ✕ |
| ☀️ Light level sensor | v1.0 | ✕ |
| 🚪 Open/close sensor | v1.0 | ✕ |
| 📊 Pressure sensor | v1.0 | ✕ |
| 🌊 Flow sensor | v1.0 | ✕ |
| 🌿 Air quality sensor | v1.2 | ✕ |
| 🔥 Smoke detector | v1.2 | ✕ |
| ⚠️ Carbon monoxide detector | v1.2 | ✕ |
| Automation & Scenes | ||
|---|---|---|
| 🎚️ Operating modes | v1.0 | ✓ |
| 🎬 Scenes & presets | v1.3 | ✕ |
| 👥 Group control | v1.1 | ✕ |
| 🔗 Device-to-device control | v1.0 | ✕ |
| ▶️ Automation actions | v1.0 | ✕ |
| ⏰ Scheduling | v1.0 | ✕ |
| 👁️ Responds to occupancy | v1.1 | ✕ |
| Info & Monitoring | ||
|---|---|---|
| 📊 Device diagnostics | v1.0 | ✓ |
| ⬇️ Firmware updates | v1.0 | ✓ |
| ⚡ Energy monitoring | v1.3 | ✕ |
| 🔋 Battery status | v1.0 | ✕ |
| Comfort & Climate | ||
|---|---|---|
| 🔥 Heating | v1.0 | ✕ |
| ❄️ Cooling | v1.0 | ✕ |
| 🔄 Auto heat/cool | v1.0 | ✕ |
| 📌 Temperature presets | v1.0 | ✕ |
| 💧 Humidity control | v1.1 | ✕ |
| 🌿 Air purification | v1.2 | ✕ |
| Security | ||
|---|---|---|
| 🔢 PIN code access | v1.0 | ✕ |
| 💳 RFID/card access | v1.0 | ✕ |
| 👤 User management | v1.0 | ✕ |
| Media & Entertainment | ||
|---|---|---|
| ▶️ Media playback | v1.0 | ✕ |
| 🔊 Volume control | v1.0 | ✕ |
| 📺 Channel selection | v1.0 | ✕ |
| 🔌 Input selection | v1.0 | ✕ |
| 📲 Casting/streaming | v1.0 | ✕ |
Not available:
Device-to-device control, Energy monitoring
Technical Details For developers
▼Device Compatibility
Can provide data to: These devices have client clusters that can read from or control this device's server clusters
On/Off (30 devices)
Matter Thread Dimmer Switch VTM31-SN
(Inovelli)
Matter Thread On/Off Switch VTM30-SN
(Inovelli)
Demo Switch
(Demo Vendor)
Demo Dimmer
(Demo Vendor)
Eve Motion
(Eve Systems)
YS1606-UC
(Plomer)
Matter Thread Fan Switch VTM35-SN
(Inovelli)
TEST_PRODUCT
(Plomer)
Eve Light Switch
(Eve Systems)
Magic Cube WS01
(Chengdu Energy Magic Cube)
+20 more
Spec Compliance & Feature Analysis
Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).
Pump
Matter 1.0
Compliant
Feature Score:
60%
Optional Not Implemented
10
Per the Matter spec, these clusters are optional. The device is compliant without them.
Extra (Beyond Spec)
2
3/3 required |
0/10 optional
Endpoints by Version
Hardware: v1.0
SW: 0.1.0
Latest Seen
2 endpoints
Endpoint 0
Device Types
Server Clusters (hover for details)✓ Rich data
Client Clusters (hover for details)
Endpoint 1
Device Types
Server Clusters (hover for details)✓ Rich data
Known Versions
| Hardware Version | Software Version | Count | First Seen | Last Seen |
|---|---|---|---|---|
| v1.0 | 0.1.0 | 2 | 2026-08-23 18:25:21 | 2026-08-25 02:34:17 |