TEST_PRODUCT

★ ★ ★ ★ ★ (100%)

TEST_VENDOR

Vendor ID: 65521

Product ID: 32769

Seen: 170 times

Supports Binding ℹ️ Ethernet Thread Wifi

What This Device Can Do

Climate

★ ★ ★ ★ ★ 82% of features

Controls
▶ 🌡️ Temperature setpoint	v1.0	✓
Thermostat What you can do: ✓ Raise or lower the target temperature ✓ Raise or lower the target temperature ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✓ Set active preset request ✓ Add thermostat suggestion ✓ Remove thermostat suggestion ✕ Atomic response optional ✓ Atomic request Information available: ✓ Current room temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✓ Abs min cool setpoint limit ✓ Abs max cool setpoint limit ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✓ Target cooling temperature ✓ Target heating temperature ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✓ Min cool setpoint limit ✓ Max cool setpoint limit ✓ Min setpoint dead band ✕ Remote sensing optional ✓ Control sequence of operation ✓ Current mode (heat/cool/auto/off) ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✓ Temperature setpoint hold ✓ Temperature setpoint hold duration ✕ Thermostat programming operation mode optional ✕ Thermostat running state optional ✕ Setpoint change source optional ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✓ Schedule types ✓ Number of presets ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✓ Active preset handle ✕ Active schedule handle optional ✓ Presets ✕ Schedules optional ✓ Setpoint hold expiry timestamp ✓ Max thermostat suggestions ✓ Thermostat suggestions ✓ Current thermostat suggestion ✓ Thermostat suggestion not following reason Enabled features: Heating Cooling AutoMode MatterScheduleConfiguration Presets Thermostat Suggestions
🌀 Fan speed control	v1.0	✕

Sensors
▶ 🌡️ Temperature sensor	v1.0	✓
Temperature Measurement Information available: ✓ Current temperature reading ✓ Minimum measurable temperature ✓ Maximum measurable temperature ✕ Tolerance optional
▶ 💧 Humidity sensor	v1.0	✓
Relative Humidity Measurement Information available: ✓ Current humidity reading ✓ Minimum measurable humidity ✓ Maximum measurable humidity ✕ Tolerance

Automation & Scenes
▶ 🎬 Scenes & presets	v1.4	✓
Scenes Management What you can do: ✓ Save current state as a scene ✓ View scene settings ✓ Delete a saved scene ✓ Command 3 ✓ Activate a saved scene ✓ Command 5 ✓ List available scenes ✓ Command 64 Information available: ✓ Currently active scene ✓ Attribute 2
▶ ⏰ Scheduling	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly temperature schedule optional ✕ Get current weekly schedule optional ✕ Get current weekly schedule optional ✕ Clear all scheduled settings optional ✕ Set active schedule request optional ✓ Set active preset request ✓ Add thermostat suggestion ✓ Remove thermostat suggestion ✕ Atomic response optional ✓ Atomic request Information available: ✓ Local temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✓ Abs min cool setpoint limit ✓ Abs max cool setpoint limit ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✓ Occupied cooling setpoint ✓ Occupied heating setpoint ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✓ Min cool setpoint limit ✓ Max cool setpoint limit ✓ Min setpoint dead band ✕ Remote sensing optional ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Max schedule changes per day optional ✕ Max schedule transitions optional ✕ Number of daily transitions optional ✓ Temperature setpoint hold ✓ Temperature setpoint hold duration ✕ Thermostat programming operation mode optional ✕ Thermostat running state optional ✕ Setpoint change source optional ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✓ Schedule types ✓ Number of presets ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✓ Active preset handle ✕ Active schedule handle optional ✓ Presets ✕ Schedules optional ✓ Setpoint hold expiry timestamp ✓ Max thermostat suggestions ✓ Thermostat suggestions ✓ Current thermostat suggestion ✓ Thermostat suggestion not following reason Enabled features: Heating Cooling AutoMode MatterScheduleConfiguration Presets Thermostat Suggestions

Comfort & Climate
▶ 🔥 Heating	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✓ Set active preset request ✓ Add thermostat suggestion ✓ Remove thermostat suggestion ✕ Atomic response optional ✓ Atomic request Information available: ✓ Current room temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✓ Abs min cool setpoint limit ✓ Abs max cool setpoint limit ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✓ Occupied cooling setpoint ✓ Target heating temperature ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✓ Min cool setpoint limit ✓ Max cool setpoint limit ✓ Min setpoint dead band ✕ Remote sensing optional ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✓ Temperature setpoint hold ✓ Temperature setpoint hold duration ✕ Thermostat programming operation mode optional ✕ Thermostat running state optional ✕ Setpoint change source optional ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✓ Schedule types ✓ Number of presets ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✓ Active preset handle ✕ Active schedule handle optional ✓ Presets ✕ Schedules optional ✓ Setpoint hold expiry timestamp ✓ Max thermostat suggestions ✓ Thermostat suggestions ✓ Current thermostat suggestion ✓ Thermostat suggestion not following reason Enabled features: Heating Cooling AutoMode MatterScheduleConfiguration Presets Thermostat Suggestions
▶ ❄️ Cooling	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✓ Set active preset request ✓ Add thermostat suggestion ✓ Remove thermostat suggestion ✕ Atomic response optional ✓ Atomic request Information available: ✓ Current room temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✓ Abs min cool setpoint limit ✓ Abs max cool setpoint limit ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✓ Target cooling temperature ✓ Occupied heating setpoint ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✓ Min cool setpoint limit ✓ Max cool setpoint limit ✓ Min setpoint dead band ✕ Remote sensing optional ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✓ Temperature setpoint hold ✓ Temperature setpoint hold duration ✕ Thermostat programming operation mode optional ✕ Thermostat running state optional ✕ Setpoint change source optional ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✓ Schedule types ✓ Number of presets ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✓ Active preset handle ✕ Active schedule handle optional ✓ Presets ✕ Schedules optional ✓ Setpoint hold expiry timestamp ✓ Max thermostat suggestions ✓ Thermostat suggestions ✓ Current thermostat suggestion ✓ Thermostat suggestion not following reason Enabled features: Heating Cooling AutoMode MatterScheduleConfiguration Presets Thermostat Suggestions
▶ 🔄 Auto heat/cool	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✓ Set active preset request ✓ Add thermostat suggestion ✓ Remove thermostat suggestion ✕ Atomic response optional ✓ Atomic request Information available: ✓ Local temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✓ Abs min cool setpoint limit ✓ Abs max cool setpoint limit ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✓ Occupied cooling setpoint ✓ Occupied heating setpoint ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✓ Min cool setpoint limit ✓ Max cool setpoint limit ✓ Min setpoint dead band ✕ Remote sensing optional ✓ Control sequence of operation ✓ Current system mode ✕ Currently heating or cooling optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✓ Temperature setpoint hold ✓ Temperature setpoint hold duration ✕ Thermostat programming operation mode optional ✕ Thermostat running state optional ✕ Setpoint change source optional ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✓ Schedule types ✓ Number of presets ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✓ Active preset handle ✕ Active schedule handle optional ✓ Presets ✕ Schedules optional ✓ Setpoint hold expiry timestamp ✓ Max thermostat suggestions ✓ Thermostat suggestions ✓ Current thermostat suggestion ✓ Thermostat suggestion not following reason Enabled features: Heating Cooling AutoMode MatterScheduleConfiguration Presets Thermostat Suggestions
▶ 📌 Temperature presets	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✓ Set active preset request ✓ Add thermostat suggestion ✓ Remove thermostat suggestion ✕ Atomic response optional ✓ Atomic request Information available: ✓ Local temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✓ Abs min cool setpoint limit ✓ Abs max cool setpoint limit ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✓ Occupied cooling setpoint ✓ Occupied heating setpoint ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✓ Min cool setpoint limit ✓ Max cool setpoint limit ✓ Min setpoint dead band ✕ Remote sensing optional ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✓ Temperature setpoint hold ✓ Temperature setpoint hold duration ✕ Thermostat programming operation mode optional ✕ Thermostat running state optional ✕ Setpoint change source optional ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✓ Schedule types ✓ Number of presets ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✓ Active preset handle ✕ Active schedule handle optional ✓ Available temperature presets ✕ Currently active preset optional ✓ Setpoint hold expiry timestamp ✓ Max thermostat suggestions ✓ Thermostat suggestions ✓ Current thermostat suggestion ✓ Thermostat suggestion not following reason Enabled features: Heating Cooling AutoMode MatterScheduleConfiguration Presets Thermostat Suggestions
💧 Humidity control	v1.0	✕

✨ Standout: Scheduling

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Thermostat Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Optional Not Implemented 5

Per the Matter spec, these clusters are optional. The device is compliant without them.

Energy Preference Fan Control (client) Temperature Measurement (client) Relative Humidity Measurement (client) Occupancy Sensing (client)

Bonus Features Implemented 2

Groups Thermostat User Interface Configuration

Extra (Beyond Spec) 2

Descriptor Identify (client)

2/2 required | 2/7 optional

On/Off Plug-in Unit Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Optional Not Implemented 2

Per the Matter spec, these clusters are optional. The device is compliant without them.

Level Control Occupancy Sensing (client)

Extra (Beyond Spec) 2

Descriptor Bridged Device Basic Information

4/4 required | 0/2 optional

Temperature Sensor Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Extra (Beyond Spec) 4

Groups Descriptor Bridged Device Basic Information Scenes Management

2/2 required | 0/0 optional

Humidity Sensor Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Extra (Beyond Spec) 4

Groups Descriptor Bridged Device Basic Information Scenes Management

2/2 required | 0/0 optional

Frequently Paired With Found in 5 installations

These devices are commonly found together in the same smart home setup based on anonymous telemetry data.

Smart Plug-in Unit SONOFF

3 shared 60% of installs

not-specified TEST_VENDOR

2 shared 40% of installs

YS1606-UC TEST_VENDOR

2 shared 40% of installs

Zemismart MT25B Roller Motor Zemismart Technology Limited

2 shared 40% of installs

SwitchBot AI Hub SwitchBot

2 shared 40% of installs

SwitchBot Robot Vacuum K11+ SwitchBot

2 shared 40% of installs

SwitchBot Hub 3 SwitchBot

2 shared 40% of installs

Eve Motion Eve Systems

2 shared 40% of installs

Endpoints by Version

Hardware: TEST_VERSION

SW: 1.0 Latest Seen 17 endpoints