The AiDot Linkind Smart Ceiling Light is a Matter device (Vendor 0x1396, Product 0x10B2) with 2 endpoints.

Last updated 2 Oct 2026

Linkind Smart Ceiling Light (PID 0x10B2)

★ ★ ★ ☆ ☆ (60%)

AiDot

Vendor ID: 5014

Product ID: 4274

Seen: 5 times

No Binding Group control Scene control Wifi

CSA Certification:

Certified Feb 26, 2026 CSA2611DMAT50753-24 v1.00.00

What This Device Can Do

Lighting

★ ★ ★ ☆ ☆ 67% of features

Controls
▶ 💡 On/Off control	v1.0	✓
On/Off What you can do: ✓ Turn off the device ✓ Turn on the device ✓ Switch between on and off ✓ Turn off with visual effect ✓ On with recall global scene ✓ Turn on for a set duration Information available: ✓ Current power state (on/off) ✓ Global scene control ✓ On time ✓ Off wait time ✓ Power-on behavior setting Enabled features: Lighting
▶ 🔆 Brightness dimming	v1.1	✓
Level Control What you can do: ✓ Set brightness to a specific level ✓ Gradually increase or decrease brightness ✓ Adjust brightness by small increments ✓ Stop ongoing brightness change ✓ Set brightness (turns on if off) ✓ Move with on off ✓ Step with on off ✓ Stop with on off ✕ Move to closest frequency optional Information available: ✓ Current brightness level (0-254) ✓ Remaining time ✓ Minimum supported brightness ✓ Maximum supported brightness ✕ Current frequency optional ✕ Min frequency optional ✕ Max frequency optional ✓ Options ✓ On off transition time ✓ On level ✓ On transition time ✓ Off transition time ✓ Default move rate ✓ Start up current level Enabled features: OnOff Lighting
▶ 🎨 Color temperature	v1.1	✓
Color Control What you can do: ✓ Move to hue ✓ Move hue ✓ Step hue ✓ Move to saturation ✓ Move saturation ✓ Step saturation ✓ Move to hue and saturation ✓ Move to color ✓ Move color ✓ Step color ✓ Set color temperature (warm to cool) ✕ Enhanced move to hue optional ✕ Enhanced move hue optional ✕ Enhanced step hue optional ✕ Enhanced move to hue and saturation optional ✕ Color loop set optional ✓ Stop move step ✓ Gradually shift color temperature ✓ Adjust temperature by small steps Information available: ✓ Current hue ✓ Current saturation ✓ Remaining time ✓ Current x ✓ Current y ✕ Drift compensation optional ✕ Compensation text optional ✓ Current color temperature ✓ Color mode ✓ Options ✓ Number of primaries ✕ Primary1x optional ✕ Primary1y optional ✕ Primary1intensity optional ✕ Primary2x optional ✕ Primary2y optional ✕ Primary2intensity optional ✕ Primary3x optional ✕ Primary3y optional ✕ Primary3intensity optional ✕ Primary4x optional ✕ Primary4y optional ✕ Primary4intensity optional ✕ Primary5x optional ✕ Primary5y optional ✕ Primary5intensity optional ✕ Primary6x optional ✕ Primary6y optional ✕ Primary6intensity optional ✕ White point x optional ✕ White point y optional ✕ Color point rx optional ✕ Color point ry optional ✕ Color point r intensity optional ✕ Color point gx optional ✕ Color point gy optional ✕ Color point g intensity optional ✕ Color point bx optional ✕ Color point by optional ✕ Color point b intensity optional ✕ Enhanced current hue optional ✓ Enhanced color mode ✕ Color loop active optional ✕ Color loop direction optional ✕ Color loop time optional ✕ Color loop start enhanced hue optional ✕ Color loop stored enhanced hue optional ✓ Color capabilities ✓ Warmest supported temperature ✓ Coolest supported temperature ✓ Couple color temp to level min mireds ✓ Start up color temperature mireds Enabled features: Hue And Saturation XY ColorTemperature
▶ 🌈 Full color (RGB)	v1.1	✓
Color Control What you can do: ✓ Set hue (color) to a specific value ✓ Gradually shift through colors ✓ Step hue ✓ Set color intensity ✓ Move saturation ✓ Step saturation ✓ Set exact color (hue + saturation) ✓ Set color using XY coordinates ✓ Move color ✓ Step color ✓ Move to color temperature ✕ Enhanced move to hue optional ✕ Enhanced move hue optional ✕ Enhanced step hue optional ✕ Enhanced move to hue and saturation optional ✕ Color loop set optional ✓ Stop move step ✓ Move color temperature ✓ Step color temperature Information available: ✓ Current color hue ✓ Current color saturation ✓ Remaining time ✓ Current X color value ✓ Current Y color value ✕ Drift compensation optional ✕ Compensation text optional ✓ Color temperature mireds ✓ Color mode ✓ Options ✓ Number of primaries ✕ Primary1x optional ✕ Primary1y optional ✕ Primary1intensity optional ✕ Primary2x optional ✕ Primary2y optional ✕ Primary2intensity optional ✕ Primary3x optional ✕ Primary3y optional ✕ Primary3intensity optional ✕ Primary4x optional ✕ Primary4y optional ✕ Primary4intensity optional ✕ Primary5x optional ✕ Primary5y optional ✕ Primary5intensity optional ✕ Primary6x optional ✕ Primary6y optional ✕ Primary6intensity optional ✕ White point x optional ✕ White point y optional ✕ Color point rx optional ✕ Color point ry optional ✕ Color point r intensity optional ✕ Color point gx optional ✕ Color point gy optional ✕ Color point g intensity optional ✕ Color point bx optional ✕ Color point by optional ✕ Color point b intensity optional ✕ Enhanced current hue optional ✓ Enhanced color mode ✕ Color loop active optional ✕ Color loop direction optional ✕ Color loop time optional ✕ Color loop start enhanced hue optional ✕ Color loop stored enhanced hue optional ✓ Color capabilities ✓ Color temp physical min mireds ✓ Color temp physical max mireds ✓ Couple color temp to level min mireds ✓ Start up color temperature mireds Enabled features: Hue And Saturation XY ColorTemperature

Automation & Scenes
▶ 🎬 Scenes & presets	v1.3	✓
Scenes Management What you can do: ✓ Save current state as a scene ✓ Save current state as a scene ✓ View scene settings ✓ View scene settings ✓ Delete a saved scene ✓ Delete a saved scene ✓ Remove all scenes ✓ Remove all scenes response ✓ Activate a saved scene ✓ Activate a saved scene ✓ Recall scene ✓ List available scenes ✓ List available scenes ✓ Copy scene ✓ Copy scene response Information available: ✓ Currently active scene ✓ Fabric scene info Enabled features: SceneNames
▶ 👥 Group control	v1.1	✓
Groups What you can do: ✓ Add device to a group ✓ Add device to a group ✓ Check group membership ✓ Check group membership ✓ Get group membership ✓ Get group membership response ✓ Remove device from a group ✓ Remove device from a group ✓ Remove from all groups ✓ Add group if identifying Information available: ✓ Supports named groups Enabled features: GroupNames
🔗 Device-to-device control	v1.0	✕
👁️ Responds to occupancy	v1.1	✕

Info & Monitoring
⚡ Energy monitoring	v1.3	✕

✨ Standout: Full color (RGB)

⚠ Not available: Energy monitoring

Setup & Reset Info

▼

Setup: Power Cycle Reset: Power Cycle

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Extended Color Light Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Occupancy Sensing (client)

Extra (Beyond Spec) 1

Descriptor

6/6 required | 0/1 optional

Endpoints by Version

Hardware: 1.0.0

SW: 1.00.00 Latest Seen 2 endpoints

Endpoint 0

Device Types

Server Clusters (hover for details)✓ Rich data

Client Clusters (hover for details)

Endpoint 1

Device Types

Server Clusters (hover for details)✓ Rich data

Known Versions

Hardware Version	Software Version	Count	First Seen	Last Seen
1.0.0	1.00.00	5	2026-10-02 08:29:31	2026-10-02 09:01:38

« Back to device index

Linkind Smart Ceiling Light (PID 0x10B2)

What This Device Can Do

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

Setup & Reset Info

Technical Details For developers

Device Compatibility

On/Off (36 devices)

Level Control (14 devices)

Color Control (5 devices)

Spec Compliance & Feature Analysis

Endpoints by Version

Hardware: 1.0.0

Endpoint 0

Descriptor

Access Control

Basic Information

OTA Software Update Requestor

General Commissioning

Network Commissioning

General Diagnostics

Wi-Fi Network Diagnostics

Administrator Commissioning

Operational Credentials

Group Key Management

OTA Software Update Provider

Endpoint 1

Identify

Groups

On/Off

Level Control

Descriptor

Scenes Management

Color Control

Known Versions