The Google LLC Nest Learning Thermostat 4th gen is a Matter device (Vendor 0x6006, Product 0x000D) with 7 endpoints.

Last updated 17 Sep 2026

Nest Learning Thermostat 4th gen

★ ★ ★ ☆ ☆ (60%)

Google LLC

Vendor ID: 24582

Product ID: 13

Seen: 2,017 times

No Binding

CSA Certification:

Certified Jun 23, 2024 CSA24363MAT43542-24 v2.1

What This Device Can Do

Climate

★ ★ ★ ☆ ☆ 36% of features

Controls
▶ 🌡️ Temperature setpoint	v1.0	✓
Thermostat What you can do: ✓ Raise or lower the target temperature ✓ Raise or lower the target temperature ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✕ Set active preset request optional ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✕ Atomic request optional Information available: ✓ Current room temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✕ Abs min cool setpoint limit optional ✕ Abs max cool setpoint limit optional ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✕ Local temperature calibration optional ✕ Target cooling temperature optional ✓ Target heating temperature ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✕ Min heat setpoint limit optional ✕ Max heat setpoint limit optional ✕ Min cool setpoint limit optional ✕ Max cool setpoint limit optional ✓ Min setpoint dead band ✕ Remote sensing optional ✓ Control sequence of operation ✓ Current mode (heat/cool/auto/off) ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✕ Temperature setpoint hold optional ✕ Temperature setpoint hold duration optional ✕ Thermostat programming operation mode optional ✕ Thermostat running state optional ✕ Setpoint change source optional ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✕ Preset types optional ✕ Schedule types optional ✕ Number of presets optional ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✕ Active preset handle optional ✕ Active schedule handle optional ✕ Presets optional ✕ Schedules optional ✕ Setpoint hold expiry timestamp optional ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensors optional ✕ Enabled sensors optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating
🌀 Fan speed control	v1.1	✕

Sensors
▶ 🌡️ Temperature sensor	v1.0	✓
Temperature Measurement Information available: ✓ Current temperature reading ✓ Minimum measurable temperature ✓ Maximum measurable temperature ✕ Tolerance optional
▶ 💧 Humidity sensor	v1.0	✓
Relative Humidity Measurement Information available: ✓ Current humidity reading ✓ Minimum measurable humidity ✓ Maximum measurable humidity ✕ Tolerance

Automation & Scenes
🎬 Scenes & presets	v1.3	✕
⏰ Scheduling	v1.0	✕

Comfort & Climate
▶ 🔥 Heating	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✕ Set active preset request optional ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✕ Atomic request optional Information available: ✓ Current room temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✕ Abs min cool setpoint limit optional ✕ Abs max cool setpoint limit optional ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✕ Local temperature calibration optional ✕ Occupied cooling setpoint optional ✓ Target heating temperature ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✕ Min heat setpoint limit optional ✕ Max heat setpoint limit optional ✕ Min cool setpoint limit optional ✕ Max cool setpoint limit optional ✓ Min setpoint dead band ✕ Remote sensing optional ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✕ Temperature setpoint hold optional ✕ Temperature setpoint hold duration optional ✕ Thermostat programming operation mode optional ✕ Thermostat running state optional ✕ Setpoint change source optional ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✕ Preset types optional ✕ Schedule types optional ✕ Number of presets optional ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✕ Active preset handle optional ✕ Active schedule handle optional ✕ Presets optional ✕ Schedules optional ✕ Setpoint hold expiry timestamp optional ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensors optional ✕ Enabled sensors optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating
❄️ Cooling	v1.0	✕
🔄 Auto heat/cool	v1.0	✕
📌 Temperature presets	v1.0	✕
💧 Humidity control	v1.1	✕

⚠ Not available: Scheduling

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Relative Humidity Measurement (1 device)

Touchscreen Switch S100 (Aqara)

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Thermostat Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

55%

Optional Not Implemented 6

Per the Matter spec, these clusters are optional. The device is compliant without them.

Groups Energy Preference Fan Control (client) Temperature Measurement (client) Relative Humidity Measurement (client) Occupancy Sensing (client)

Bonus Features Implemented 1

Thermostat User Interface Configuration

Extra (Beyond Spec) 2

On/Off Descriptor

2/2 required | 1/7 optional

Temperature Sensor Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Extra (Beyond Spec) 1

Descriptor

2/2 required | 0/0 optional

Humidity Sensor Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Extra (Beyond Spec) 1

Descriptor

2/2 required | 0/0 optional

Frequently Paired With Found in 19 installations

These devices are commonly found together in the same smart home setup based on anonymous telemetry data.

Matter Thread Dimmer Switch VTM31-SN Inovelli

11 shared 57.9% of installs

Eve Energy Eve Systems

10 shared 52.6% of installs

Aqara Door and Window Sensor P2 Aqara

8 shared 42.1% of installs

Aqara Hub Aqara

7 shared 36.8% of installs

Essentials A19-A60 Nanoleaf

7 shared 36.8% of installs

MYGGBETT door/window sensor IKEA of Sweden

6 shared 31.6% of installs

BILRESA dual button IKEA of Sweden

6 shared 31.6% of installs

Onvis Smart Plug S4 Onvis

6 shared 31.6% of installs

Endpoints by Version