The SwitchBot SwitchBot Light is a Matter device (Vendor 0x1397, Product 0x07F8) with 2556 endpoints.

Last updated 8 Oct 2026

SwitchBot Light

★ ★ ★ ☆ ☆ ☆ (53%) Missing required clusters

SwitchBot

Vendor ID: 5015

Product ID: 2040

Seen: 1,278 times

No Binding Group control Wifi

CSA Certification:

Certified Apr 17, 2025 CSA25208MAT45402-24 v1.0

What This Device Can Do

Lighting

★ ★ ★★ ☆ ☆ 44% of features

Controls
▶ 💡 On/Off control	v1.0	✓
On/Off What you can do: ✓ Turn off the device ✓ Turn on the device ✓ Switch between on and off ✓ Turn off with visual effect ✓ On with recall global scene ✓ Turn on for a set duration Information available: ✓ Current power state (on/off) ✓ Global scene control ✓ On time ✓ Off wait time ✓ Power-on behavior setting Enabled features: Lighting
▶ 🔆 Brightness dimming	v1.1	✓
Level Control What you can do: ✓ Set brightness to a specific level ✓ Gradually increase or decrease brightness ✓ Adjust brightness by small increments ✓ Stop ongoing brightness change ✓ Set brightness (turns on if off) ✓ Move with on off ✓ Step with on off ✓ Stop with on off ✕ Move to closest frequency optional Information available: ✓ Current brightness level (0-254) ✓ Remaining time ✓ Minimum supported brightness ✓ Maximum supported brightness ✕ Current frequency optional ✕ Min frequency optional ✕ Max frequency optional ✓ Options ✕ On off transition time optional ✓ On level ✕ On transition time optional ✕ Off transition time optional ✕ Default move rate optional ✓ Start up current level Enabled features: OnOff Lighting
▶ 🌈 Full color (RGB)	v1.1	✓
Color Control What you can do: ✓ Set hue (color) to a specific value ✓ Gradually shift through colors ✓ Step hue ✓ Set color intensity ✓ Move saturation ✓ Step saturation ✓ Set exact color (hue + saturation) ✓ Set color using XY coordinates ✓ Move color ✓ Step color ✕ Move to color temperature optional ✕ Enhanced move to hue optional ✕ Enhanced move hue optional ✕ Enhanced step hue optional ✕ Enhanced move to hue and saturation optional ✕ Color loop set optional ✓ Stop move step ✕ Move color temperature optional ✕ Step color temperature optional Information available: ✓ Current color hue ✓ Current color saturation ✓ Remaining time ✓ Current X color value ✓ Current Y color value ✕ Drift compensation optional ✕ Compensation text optional ✕ Color temperature mireds optional ✓ Color mode ✓ Options ✓ Number of primaries ✕ Primary1x optional ✕ Primary1y optional ✕ Primary1intensity optional ✕ Primary2x optional ✕ Primary2y optional ✕ Primary2intensity optional ✕ Primary3x optional ✕ Primary3y optional ✕ Primary3intensity optional ✕ Primary4x optional ✕ Primary4y optional ✕ Primary4intensity optional ✕ Primary5x optional ✕ Primary5y optional ✕ Primary5intensity optional ✕ Primary6x optional ✕ Primary6y optional ✕ Primary6intensity optional ✕ White point x optional ✕ White point y optional ✕ Color point rx optional ✕ Color point ry optional ✕ Color point r intensity optional ✕ Color point gx optional ✕ Color point gy optional ✕ Color point g intensity optional ✕ Color point bx optional ✕ Color point by optional ✕ Color point b intensity optional ✕ Enhanced current hue optional ✓ Enhanced color mode ✕ Color loop active optional ✕ Color loop direction optional ✕ Color loop time optional ✕ Color loop start enhanced hue optional ✕ Color loop stored enhanced hue optional ✓ Color capabilities ✕ Color temp physical min mireds optional ✕ Color temp physical max mireds optional ✕ Couple color temp to level min mireds optional ✕ Start up color temperature mireds optional Enabled features: Hue And Saturation XY
🎨 Color temperature	v1.1	✕

Automation & Scenes
▶ 👥 Group control	v1.1	✓
Groups What you can do: ✓ Add device to a group ✓ Add device to a group ✓ Check group membership ✓ Check group membership ✓ Get group membership ✓ Get group membership response ✓ Remove device from a group ✓ Remove device from a group ✓ Remove from all groups ✓ Add group if identifying Information available: ✓ Supports named groups Enabled features: GroupNames
🎬 Scenes & presets	v1.3	✕
🔗 Device-to-device control	v1.0	✕
👁️ Responds to occupancy	v1.1	✕

Info & Monitoring
⚡ Energy monitoring	v1.3	✕

✨ Standout: Full color (RGB)

⚠ Not available: Energy monitoring

Setup & Reset Info

▼

Setup: Power Cycle Reset: Standard

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Extended Color Light Matter 1.0 Missing Required

★ ★ ★ ☆ ☆ ☆ Feature Score:

53.3%

Missing Required 1

Scenes Management *

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Occupancy Sensing (client)

Extra (Beyond Spec) 1

Descriptor

5/6 required | 0/1 optional

Frequently Paired With Found in 30 installations

These devices are commonly found together in the same smart home setup based on anonymous telemetry data.

Hub 2 SwitchBot

10 shared 33.3% of installs

MYGGBETT door/window sensor IKEA of Sweden

9 shared 30% of installs

BILRESA dual button IKEA of Sweden

9 shared 30% of installs

Aqara Door and Window Sensor P2 Aqara

9 shared 30% of installs

SwitchBot Hub SwitchBot

7 shared 23.3% of installs

Level Lock+ (Matter) Level Home

7 shared 23.3% of installs

TIMMERFLOTTE temp/hmd sensor IKEA of Sweden

7 shared 23.3% of installs

ALPSTUGA air quality monitor IKEA of Sweden

7 shared 23.3% of installs

Endpoints by Version