Smart Wired Gateway Pro

★ ★ ★ ☆ ☆ ☆ (60%) Missing required clusters

Tuya

Vendor ID: 4701

Product ID: 112

Seen: 16 times

No Binding

CSA Certification:

Certified Nov 1, 2022 CSA22071MAT40071-00 v2.0.0

What This Device Can Do

Sensors

★ ★ ★★ ☆ ☆ 38% of features

Sensors
▶ 👁️ Occupancy/motion sensor	v1.0	✓
Occupancy Sensing Information available: ✓ Current occupancy state (detected/clear) ✓ Type of sensor (PIR/ultrasonic/etc) ✓ Occupancy sensor type bitmap ✕ Hold time optional ✕ Hold time limits optional ✕ Pir occupied to unoccupied delay optional ✕ Pir unoccupied to occupied delay optional ✕ Pir unoccupied to occupied threshold optional ✕ Ultrasonic occupied to unoccupied delay optional ✕ Ultrasonic unoccupied to occupied delay optional ✕ Ultrasonic unoccupied to occupied threshold optional ✕ Physical contact occupied to unoccupied delay optional ✕ Physical contact unoccupied to occupied delay optional ✕ Physical contact unoccupied to occupied threshold optional
▶ ☀️ Light level sensor	v1.0	✓
Illuminance Measurement Information available: ✓ Current light level (lux) ✓ Minimum measurable lux ✓ Maximum measurable lux ✕ Tolerance optional ✕ Light sensor type optional
🌡️ Temperature sensor	v1.0	✕
💧 Humidity sensor	v1.0	✕
🚪 Open/close sensor	v1.0	✕
📊 Pressure sensor	v1.0	✕
🌿 Air quality sensor	v1.2	✕

Info & Monitoring
▶ 🔋 Battery status	v1.0	✓
Power Source Information available: ✓ Power source status ✓ Order ✓ Description ✕ Wired assessed input voltage optional ✕ Wired assessed input frequency optional ✕ Wired current type optional ✕ Wired assessed current optional ✕ Wired nominal voltage optional ✕ Wired maximum current optional ✕ Wired present optional ✕ Active wired faults optional ✕ Bat voltage optional ✕ Battery percentage remaining optional ✕ Bat time remaining optional ✕ Battery charge level (ok/warning/critical) optional ✕ Bat replacement needed optional ✕ Bat replaceability optional ✕ Bat present optional ✕ Active bat faults optional ✕ Bat replacement description optional ✕ Bat common designation optional ✕ Bat ansi designation optional ✕ Bat iec designation optional ✕ Bat approved chemistry optional ✕ Bat capacity optional ✕ Bat quantity optional ✕ Bat charge state optional ✕ Bat time to full charge optional ✕ Bat functional while charging optional ✕ Bat charging current optional ✕ Active bat charge faults optional ✓ Endpoint list Enabled features: Wired

Setup & Reset Info

▼

Setup: Standard Reset: Standard

Setup Guide

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

On/Off (19 devices)

Matter Thread Dimmer Switch VTM31-SN (Inovelli) Matter Thread On/Off Switch VTM30-SN (Inovelli) Matter Thread Fan Switch VTM35-SN (Inovelli) Eve Motion (Eve Systems) Eve Light Switch (Eve Systems) Demo Switch (Demo Vendor) Demo Dimmer (Demo Vendor) Push Button Module (Insta GmbH) Dimmable Light (EcoDim) IM Pushbutton Module (innovation matters iot GmbH) +9 more

Level Control (8 devices)

Matter Thread Dimmer Switch VTM31-SN (Inovelli) Matter Thread On/Off Switch VTM30-SN (Inovelli) Matter Thread Fan Switch VTM35-SN (Inovelli) Demo Dimmer (Demo Vendor) Push Button Module (Insta GmbH) Dimmable Light (EcoDim) IM Pushbutton Module (innovation matters iot GmbH) Matter Light Switch (t0bst4r)

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Occupancy Sensor Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Boolean State Configuration

Extra (Beyond Spec) 5

Groups Scenes Descriptor Fixed Label User Label

2/2 required | 0/1 optional

Light Sensor Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Extra (Beyond Spec) 5

Groups Scenes Descriptor Fixed Label User Label

2/2 required | 0/0 optional

Dimmer Switch Matter 1.0 Missing Required

★ ☆ ☆ ☆ ☆ ☆ Feature Score:

Missing Required 4

Identify Identify (client) On/Off (client) Level Control (client)

Optional Not Implemented 2

Per the Matter spec, these clusters are optional. The device is compliant without them.

Groups (client) Scenes Management (client)

Extra (Beyond Spec) 5

On/Off Level Control Descriptor Fixed Label User Label

0/4 required | 0/2 optional

On/Off Light Switch Matter 1.0 Missing Required

★ ☆ ☆ ☆ ☆ ☆ Feature Score:

Missing Required 3

Identify Identify (client) On/Off (client)

Optional Not Implemented 2

Per the Matter spec, these clusters are optional. The device is compliant without them.

Groups (client) Scenes Management (client)

Extra (Beyond Spec) 4

On/Off Descriptor Fixed Label User Label

0/3 required | 0/2 optional

Frequently Paired With Found in 3 installations

These devices are commonly found together in the same smart home setup based on anonymous telemetry data.

Aqara Hub Aqara

2 shared 66.7% of installs

Endpoints by Version