Decora Smart Wi-Fi Motion Sensing Dimmer

★ ★ ★ ☆ ☆ ☆ (60%) Missing required clusters

Leviton

Vendor ID: 4251

Product ID: 4102

Seen: 6 times

No Binding Wifi

Links: 🔗 Product Page 🛟 Support 📖 Manual

What This Device Can Do

Lighting

★ ★ ★★ ☆ ☆ 33% of features

Controls
▶ 💡 On/Off control	v1.0	✓
On/Off What you can do: ✓ Turn off the device ✓ Turn on the device ✓ Switch between on and off ✓ Turn off with visual effect ✓ On with recall global scene ✓ Turn on for a set duration Information available: ✓ Current power state (on/off) ✓ Global scene control ✓ On time ✓ Off wait time ✓ Power-on behavior setting Enabled features: Lighting
▶ 🔆 Brightness dimming	v1.0	✓
Level Control What you can do: ✓ Set brightness to a specific level ✓ Gradually increase or decrease brightness ✓ Adjust brightness by small increments ✓ Stop ongoing brightness change ✓ Set brightness (turns on if off) ✓ Move with on off ✓ Step with on off ✓ Stop with on off ✕ Move to closest frequency optional Information available: ✓ Current brightness level (0-254) ✓ Remaining time ✓ Minimum supported brightness ✓ Maximum supported brightness ✕ Current frequency optional ✕ Min frequency optional ✕ Max frequency optional ✓ Options ✓ On off transition time ✓ On level ✕ On transition time optional ✕ Off transition time optional ✓ Default move rate ✓ Start up current level Enabled features: OnOff Lighting
🎨 Color temperature	v1.0	✕
🌈 Full color (RGB)	v1.0	✕

Automation & Scenes
▶ 👥 Group control	v1.0	✓
Groups What you can do: ✓ Add device to a group ✓ Add device to a group ✓ Check group membership ✓ Check group membership ✓ Get group membership ✓ Get group membership response ✓ Remove device from a group ✓ Remove device from a group ✓ Remove from all groups ✓ Add group if identifying Information available: ✓ Supports named groups Enabled features: GroupNames
🎬 Scenes & presets	v1.4	✕
🔗 Device-to-device control	v1.0	✕
👁️ Responds to occupancy	v1.0	✕

Info & Monitoring
⚡ Energy monitoring	v1.3	✕

⚠ Not available: Full color (RGB), Energy monitoring

Setup & Reset Info

▼

Setup: Power Cycle Reset: Power Cycle

Additional Steps:

Amber

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

On/Off (23 devices)

Matter Thread Dimmer Switch VTM31-SN (Inovelli) Matter Thread On/Off Switch VTM30-SN (Inovelli) Matter Thread Fan Switch VTM35-SN (Inovelli) Eve Motion (Eve Systems) Eve Light Switch (Eve Systems) Demo Switch (Demo Vendor) Demo Dimmer (Demo Vendor) Magic Cube WS01 (Chengdu Energy Magic Cube) Push Button Module (Insta GmbH) Dimmable Light (EcoDim) +13 more

Level Control (9 devices)

Matter Thread Dimmer Switch VTM31-SN (Inovelli) Matter Thread On/Off Switch VTM30-SN (Inovelli) Matter Thread Fan Switch VTM35-SN (Inovelli) Demo Dimmer (Demo Vendor) Push Button Module (Insta GmbH) Dimmable Light (EcoDim) IM Pushbutton Module (innovation matters iot GmbH) Touchscreen Switch S100 (Aqara) Matter Light Switch (TEST_VENDOR)

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Dimmable Light Matter 1.0 Missing Required

★ ★ ★ ☆ ☆ ☆ Feature Score:

52%

Missing Required 1

Scenes Management *

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Occupancy Sensing (client)

Extra (Beyond Spec) 1

Descriptor

4/5 required | 0/1 optional

Occupancy Sensor Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Boolean State Configuration

Extra (Beyond Spec) 1

Descriptor

2/2 required | 0/1 optional

Endpoints by Version