The Eve Systems Eve Thermo is a Matter device (Vendor 0x130A, Product 0x007D) with 4 endpoints.

Last updated 6 Oct 2026

Eve Thermo (PID 0x007D)

★ ★ ★ ★ ☆ ☆ (68%)

Eve Systems

Vendor ID: 4874

Product ID: 125

Seen: 1,910 times

Controls devices directly Thread

CSA Certification:

Certified Jul 7, 2025 CSA25497MAT46057-24 v3.6.0

What This Device Can Do

Climate

★ ★ ★ ★★ ☆ 27% of features

Controls
▶ 🌡️ Temperature setpoint	v1.0	✓
Thermostat What you can do: ✓ Raise or lower the target temperature ✓ Raise or lower the target temperature ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✓ Set active preset request ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✓ Atomic request Information available: ✓ Current room temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✕ Abs min cool setpoint limit optional ✕ Abs max cool setpoint limit optional ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✕ Target cooling temperature optional ✓ Target heating temperature ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✕ Min cool setpoint limit optional ✕ Max cool setpoint limit optional ✕ Min setpoint dead band optional ✓ Remote sensing ✓ Control sequence of operation ✓ Current mode (heat/cool/auto/off) ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✓ Temperature setpoint hold ✓ Temperature setpoint hold duration ✕ Thermostat programming operation mode optional ✓ Thermostat running state ✓ Setpoint change source ✓ Setpoint change amount ✓ Setpoint change source timestamp ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✕ Schedule types optional ✓ Number of presets ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✓ Active preset handle ✕ Active schedule handle optional ✓ Presets ✕ Schedules optional ✓ Setpoint hold expiry timestamp ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensor handles optional ✕ Enabled sensor handles optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating Presets
🌀 Fan speed control	v1.1	✕

Sensors
🌡️ Temperature sensor	v1.0	✕
💧 Humidity sensor	v1.0	✕

Automation & Scenes
🎬 Scenes & presets	v1.3	✕
⏰ Scheduling	v1.0	✕

Comfort & Climate
▶ 🔥 Heating	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✓ Set active preset request ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✓ Atomic request Information available: ✓ Current room temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✕ Abs min cool setpoint limit optional ✕ Abs max cool setpoint limit optional ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✕ Occupied cooling setpoint optional ✓ Target heating temperature ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✕ Min cool setpoint limit optional ✕ Max cool setpoint limit optional ✕ Min setpoint dead band optional ✓ Remote sensing ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✓ Temperature setpoint hold ✓ Temperature setpoint hold duration ✕ Thermostat programming operation mode optional ✓ Thermostat running state ✓ Setpoint change source ✓ Setpoint change amount ✓ Setpoint change source timestamp ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✕ Schedule types optional ✓ Number of presets ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✓ Active preset handle ✕ Active schedule handle optional ✓ Presets ✕ Schedules optional ✓ Setpoint hold expiry timestamp ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensor handles optional ✕ Enabled sensor handles optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating Presets
▶ 📌 Temperature presets	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✓ Set active preset request ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✓ Atomic request Information available: ✓ Local temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✕ Abs min cool setpoint limit optional ✕ Abs max cool setpoint limit optional ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✕ Occupied cooling setpoint optional ✓ Occupied heating setpoint ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✕ Min cool setpoint limit optional ✕ Max cool setpoint limit optional ✕ Min setpoint dead band optional ✓ Remote sensing ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✓ Temperature setpoint hold ✓ Temperature setpoint hold duration ✕ Thermostat programming operation mode optional ✓ Thermostat running state ✓ Setpoint change source ✓ Setpoint change amount ✓ Setpoint change source timestamp ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✕ Schedule types optional ✓ Number of presets ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✓ Active preset handle ✕ Active schedule handle optional ✓ Available temperature presets ✕ Currently active preset optional ✓ Setpoint hold expiry timestamp ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensor handles optional ✕ Enabled sensor handles optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating Presets
❄️ Cooling	v1.0	✕
🔄 Auto heat/cool	v1.0	✕
💧 Humidity control	v1.1	✕

⚠ Not available: Humidity sensor, Scheduling

Setup & Reset Info

▼

Setup: Power Cycle Reset: Standard

Technical Details For developers

▼

Device Compatibility

Can control or read from: This device has client clusters that can interact with these devices' server clusters (e.g., a switch controlling a light)

Temperature Measurement (51 devices)

TIMMERFLOTTE temp/hmd sensor (IKEA of Sweden) ALPSTUGA air quality monitor (IKEA of Sweden) Matter Thread On/Off Switch VTM30-SN (Inovelli) Presence Multi-Sensor FP300 (Aqara) Temperature Sensor (Shenzhen Smart Links Technology., LTD) Aqara Hub (Aqara) YS1606-UC (Matterbridge) Aqara Hub (Aqara) Aqara Hub (Aqara) DIRIGERA Hub for smart products (IKEA of Sweden) +41 more

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Thermostat (3 devices)

Aqara Climate Sensor W100 (Aqara) Eve Thermo Control (Eve Systems) Touchscreen Switch S100 (Aqara)

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Thermostat Matter 1.0 Compliant

★ ★ ★ ★ ☆ ☆ Feature Score:

67.5% +4% bonus

Optional Not Implemented 5

Per the Matter spec, these clusters are optional. The device is compliant without them.

Groups Energy Preference Fan Control (client) Relative Humidity Measurement (client) Occupancy Sensing (client)

Bonus Features Implemented 2

Thermostat User Interface Configuration Temperature Measurement (client)

Extra (Beyond Spec) 3

Descriptor Binding Cluster 0x130AFC01

2/2 required | 2/7 optional

Frequently Paired With Found in 22 installations

These devices are commonly found together in the same smart home setup based on anonymous telemetry data.

Eve Energy Eve Systems

19 shared 86.4% of installs

Eve Door & Window Eve Systems

15 shared 68.2% of installs

Eve Motion Eve Systems

14 shared 63.6% of installs

Eve Thermo Control Eve Systems

12 shared 54.5% of installs

MYGGBETT door/window sensor IKEA of Sweden

9 shared 40.9% of installs

TIMMERFLOTTE temp/hmd sensor IKEA of Sweden

9 shared 40.9% of installs

Aqara Smart Light Aqara

9 shared 40.9% of installs

Heiman smart smoke sensor HEIMAN

8 shared 36.4% of installs

Endpoints by Version

Hardware: 1.1

SW: 3.6.5 Latest Seen 2 endpoints

Endpoint 0

Device Types

Server Clusters (hover for details)✓ Rich data

Client Clusters (hover for details)

Endpoint 1

Has Binding Cluster

Device Types

Server Clusters (hover for details)✓ Rich data

Client Clusters (hover for details)

SW: 3.6.1 2 endpoints

Endpoint 0

Device Types

Server Clusters✓ Rich data

Client Clusters

Endpoint 1

Has Binding Cluster

Device Types

Server Clusters✓ Rich data

Client Clusters

Known Versions

Hardware Version	Software Version	Count	First Seen	Last Seen
1.1	3.6.5	1,903	2026-01-08 00:46:10	2026-10-06 11:34:40
1.1	3.6.1	7	2026-01-09 21:27:12	2026-07-22 14:58:20

« Back to device index

Eve Thermo (PID 0x007D)

What This Device Can Do

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

Setup & Reset Info

Technical Details For developers

Device Compatibility

Temperature Measurement (51 devices)

Thermostat (3 devices)

Spec Compliance & Feature Analysis

Frequently Paired With Found in 22 installations

Endpoints by Version

Hardware: 1.1

Endpoint 0

Descriptor

Access Control

Basic Information

OTA Software Update Requestor

Power Source

General Commissioning

Network Commissioning

Diagnostic Logs

General Diagnostics

Software Diagnostics

Thread Network Diagnostics

Time Synchronization

Administrator Commissioning

Operational Credentials

Group Key Management

ICD Management

Cluster 323615744

OTA Software Update Provider

Endpoint 1

Identify

Descriptor

Binding

Thermostat

Thermostat User Interface Configuration

Cluster 319486977

Temperature Measurement

Endpoint 0

Endpoint 1

Known Versions