The ESPHome Matter Heat Pump is a Matter device (Vendor 0xFFF1, Product 0x800F) with 6 endpoints.

Last updated 29 Oct 2026

Matter Heat Pump

★ ★ ★ ★ ★ ☆ (88%)

ESPHome

Vendor ID: 65521

Product ID: 32783

Seen: 1 time

Controls devices directly Group control Thread Wifi

What This Device Can Do

Climate

★ ★ ★ ★ ★★ 45% of features

Controls
▶ 🌡️ Temperature setpoint	v1.0	✓
Thermostat What you can do: ✓ Raise or lower the target temperature ✓ Raise or lower the target temperature ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✕ Set active preset request optional ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✕ Atomic request optional Information available: ✓ Current room temperature ✓ Outdoor temperature ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✓ Abs min cool setpoint limit ✓ Abs max cool setpoint limit ✓ Pi cooling demand ✓ Pi heating demand ✕ Hvac system type configuration optional ✕ Local temperature calibration optional ✓ Target cooling temperature ✓ Target heating temperature ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✓ Min cool setpoint limit ✓ Max cool setpoint limit ✕ Min setpoint dead band optional ✕ Remote sensing optional ✓ Control sequence of operation ✓ Current mode (heat/cool/auto/off) ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✕ Temperature setpoint hold optional ✕ Temperature setpoint hold duration optional ✕ Thermostat programming operation mode optional ✓ Thermostat running state ✕ Setpoint change source optional ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✕ Preset types optional ✕ Schedule types optional ✕ Number of presets optional ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✕ Active preset handle optional ✕ Active schedule handle optional ✕ Presets optional ✕ Schedules optional ✕ Setpoint hold expiry timestamp optional ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensor handles optional ✕ Enabled sensor handles optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating Cooling
🌀 Fan speed control	v1.1	✕

Sensors
▶ 🌡️ Temperature sensor	v1.0	✓
Temperature Measurement Information available: ✓ Current temperature reading ✓ Minimum measurable temperature ✓ Maximum measurable temperature ✕ Tolerance optional
▶ 💧 Humidity sensor	v1.0	✓
Relative Humidity Measurement Information available: ✓ Current humidity reading ✓ Minimum measurable humidity ✓ Maximum measurable humidity ✕ Tolerance

Automation & Scenes
🎬 Scenes & presets	v1.3	✕
⏰ Scheduling	v1.0	✕

Comfort & Climate
▶ 🔥 Heating	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✕ Set active preset request optional ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✕ Atomic request optional Information available: ✓ Current room temperature ✓ Outdoor temperature ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✓ Abs min cool setpoint limit ✓ Abs max cool setpoint limit ✓ Pi cooling demand ✓ Pi heating demand ✕ Hvac system type configuration optional ✕ Local temperature calibration optional ✓ Occupied cooling setpoint ✓ Target heating temperature ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✓ Min cool setpoint limit ✓ Max cool setpoint limit ✕ Min setpoint dead band optional ✕ Remote sensing optional ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✕ Temperature setpoint hold optional ✕ Temperature setpoint hold duration optional ✕ Thermostat programming operation mode optional ✓ Thermostat running state ✕ Setpoint change source optional ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✕ Preset types optional ✕ Schedule types optional ✕ Number of presets optional ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✕ Active preset handle optional ✕ Active schedule handle optional ✕ Presets optional ✕ Schedules optional ✕ Setpoint hold expiry timestamp optional ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensor handles optional ✕ Enabled sensor handles optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating Cooling
▶ ❄️ Cooling	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✕ Set active schedule request optional ✕ Set active preset request optional ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✕ Atomic request optional Information available: ✓ Current room temperature ✓ Outdoor temperature ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✓ Abs min cool setpoint limit ✓ Abs max cool setpoint limit ✓ Pi cooling demand ✓ Pi heating demand ✕ Hvac system type configuration optional ✕ Local temperature calibration optional ✓ Target cooling temperature ✓ Occupied heating setpoint ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✓ Min cool setpoint limit ✓ Max cool setpoint limit ✕ Min setpoint dead band optional ✕ Remote sensing optional ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✕ Temperature setpoint hold optional ✕ Temperature setpoint hold duration optional ✕ Thermostat programming operation mode optional ✓ Thermostat running state ✕ Setpoint change source optional ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✕ Preset types optional ✕ Schedule types optional ✕ Number of presets optional ✕ Number of schedules optional ✕ Number of schedule transitions optional ✕ Number of schedule transition per day optional ✕ Active preset handle optional ✕ Active schedule handle optional ✕ Presets optional ✕ Schedules optional ✕ Setpoint hold expiry timestamp optional ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensor handles optional ✕ Enabled sensor handles optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating Cooling
🔄 Auto heat/cool	v1.0	✕
📌 Temperature presets	v1.0	✕
💧 Humidity control	v1.1	✕

⚠ Not available: Scheduling

Technical Details For developers

▼

Device Compatibility

Can control or read from: This device has client clusters that can interact with these devices' server clusters (e.g., a switch controlling a light)

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Thermostat (3 devices)

Aqara Climate Sensor W100 (Aqara) Eve Thermo Control (Eve Systems) Touchscreen Switch S100 (Aqara)

Relative Humidity Measurement (1 device)

Touchscreen Switch S100 (Aqara)

Temperature Measurement (5 devices)

Eve Thermo (Eve Systems) Eve Thermo (Eve Systems) Touchscreen Switch S100 (Aqara) Matter Thermostat (ESPHome) Eve Thermostat (Eve Systems)

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Heat Pump Matter 1.4 Compliant

★ ★ ★ ★ ★ ☆ Feature Score:

87.5%

Optional Not Implemented 1

Per the Matter spec, these clusters are optional. The device is compliant without them.

Thermostat

Bonus Features Implemented 2

Identify Thermostat (client)

Extra (Beyond Spec) 1

Descriptor

0/0 required | 2/3 optional

Thermostat Matter 1.0 Compliant

★ ★ ★ ★ ☆ Feature Score:

80% +8% bonus

Optional Not Implemented 4

Per the Matter spec, these clusters are optional. The device is compliant without them.

Thermostat User Interface Configuration Energy Preference Fan Control (client) Occupancy Sensing (client)

Bonus Features Implemented 3

Groups Temperature Measurement (client) Relative Humidity Measurement (client)

Extra (Beyond Spec) 4

Descriptor Binding Relative Humidity Measurement Thermostat (client)

2/2 required | 3/7 optional

Temperature Sensor Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

60%

Extra (Beyond Spec) 3

Descriptor Binding Temperature Measurement (client)

2/2 required | 0/0 optional

Endpoints by Version

Hardware: prerelease

SW: 3.4.1+0 Latest Seen 6 endpoints

Endpoint 0

Device Types

Server Clusters (hover for details)✓ Rich data

Client Clusters (hover for details)

Hardware Version	Software Version	Count	First Seen	Last Seen
prerelease	3.4.1+0	1	2026-10-29 09:04:45	2026-10-29 09:04:45

« Back to device index

Matter Heat Pump

What This Device Can Do

What you can do:

Information available:

Enabled features:

Information available:

Information available:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

Technical Details For developers

Device Compatibility

Thermostat (38 devices)

Temperature Measurement (52 devices)

Relative Humidity Measurement (54 devices)

Thermostat (3 devices)

Relative Humidity Measurement (1 device)

Temperature Measurement (5 devices)

Spec Compliance & Feature Analysis

Endpoints by Version

Hardware: prerelease

Endpoint 0

Descriptor

Access Control

Basic Information

OTA Software Update Requestor

General Commissioning

Network Commissioning

Diagnostic Logs

General Diagnostics

Software Diagnostics

Thread Network Diagnostics

Wi-Fi Network Diagnostics

Administrator Commissioning

Operational Credentials

Group Key Management

OTA Software Update Provider

Endpoint 1

Identify

Descriptor

Thermostat

Endpoint 2

Identify

Groups

Descriptor

Binding

Thermostat

Relative Humidity Measurement

Thermostat

Temperature Measurement

Relative Humidity Measurement

Endpoint 3

Identify

Groups

Descriptor

Binding

Thermostat

Relative Humidity Measurement

Thermostat

Temperature Measurement

Relative Humidity Measurement

Endpoint 4

Identify

Groups

Descriptor

Binding

Thermostat

Relative Humidity Measurement

Thermostat

Temperature Measurement

Relative Humidity Measurement

Endpoint 5

Identify

Descriptor

Binding

Temperature Measurement

Temperature Measurement