The TCL TCL Window AC is a Matter device (Vendor 0x1334, Product 0x22E1) with 2 endpoints.

Last updated 29 Apr 2026

TCL Window AC (PID 0x22E1)

★ ★ ★ ☆ ☆ (55%)

TCL

Vendor ID: 4916

Product ID: 8929

Seen: 50 times

No Binding Group control Scene control Wifi

CSA Certification:

Certified Oct 15, 2023 CSA23C44MAT41754-24 v1.0

What This Device Can Do

Climate

★ ★ ★ ☆ ☆ 73% of features

Controls
▶ 🌀 Fan speed control	v1.1	✓
Fan Control What you can do: • Adjust fan speed by one step Information available: • Current fan mode (off/low/medium/high/auto) • Fan mode sequence • Target speed percentage • Current speed percentage • Speed max • Speed setting • Speed current • Rock support • Rock setting • Wind support • Wind setting • Airflow direction
▶ 🌡️ Temperature setpoint	v1.0	✓
Thermostat What you can do: • Raise or lower the target temperature • Raise or lower the target temperature • Set weekly schedule • Get weekly schedule • Add thermostat suggestion response • Clear weekly schedule • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Current room temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Target cooling temperature • Target heating temperature • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • Current mode (heat/cool/auto/off) • Thermostat running mode • Start of week • Number of weekly transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Presets • Schedules • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason • Critical freeze protection • Critical overheat protection • Sensors • Available sensor handles • Enabled sensor handles • Number of sensor schedule transitions • Sensor schedule

Sensors
🌡️ Temperature sensor	v1.0	✕
💧 Humidity sensor	v1.0	✕

Automation & Scenes
▶ ⏰ Scheduling	v1.0	✓
Thermostat What you can do: • Setpoint raise lower • Get weekly schedule response • Set weekly temperature schedule • Get current weekly schedule • Get current weekly schedule • Clear all scheduled settings • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Local temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Occupied cooling setpoint • Occupied heating setpoint • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • System mode • Thermostat running mode • Max schedule changes per day • Max schedule transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Presets • Schedules • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason • Critical freeze protection • Critical overheat protection • Sensors • Available sensor handles • Enabled sensor handles • Number of sensor schedule transitions • Sensor schedule
🎬 Scenes & presets	v1.3	✕

Comfort & Climate
▶ 🔥 Heating	v1.0	✓
Thermostat What you can do: • Setpoint raise lower • Get weekly schedule response • Set weekly schedule • Get weekly schedule • Add thermostat suggestion response • Clear weekly schedule • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Current room temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Occupied cooling setpoint • Target heating temperature • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • System mode • Thermostat running mode • Start of week • Number of weekly transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Presets • Schedules • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason • Critical freeze protection • Critical overheat protection • Sensors • Available sensor handles • Enabled sensor handles • Number of sensor schedule transitions • Sensor schedule
▶ ❄️ Cooling	v1.0	✓
Thermostat What you can do: • Setpoint raise lower • Get weekly schedule response • Set weekly schedule • Get weekly schedule • Add thermostat suggestion response • Clear weekly schedule • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Current room temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Target cooling temperature • Occupied heating setpoint • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • System mode • Thermostat running mode • Start of week • Number of weekly transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Presets • Schedules • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason • Critical freeze protection • Critical overheat protection • Sensors • Available sensor handles • Enabled sensor handles • Number of sensor schedule transitions • Sensor schedule
▶ 🔄 Auto heat/cool	v1.0	✓
Thermostat What you can do: • Setpoint raise lower • Get weekly schedule response • Set weekly schedule • Get weekly schedule • Add thermostat suggestion response • Clear weekly schedule • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Local temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Occupied cooling setpoint • Occupied heating setpoint • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • Current system mode • Currently heating or cooling • Start of week • Number of weekly transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Presets • Schedules • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason • Critical freeze protection • Critical overheat protection • Sensors • Available sensor handles • Enabled sensor handles • Number of sensor schedule transitions • Sensor schedule
▶ 📌 Temperature presets	v1.0	✓
Thermostat What you can do: • Setpoint raise lower • Get weekly schedule response • Set weekly schedule • Get weekly schedule • Add thermostat suggestion response • Clear weekly schedule • Set active schedule request • Set active preset request • Add thermostat suggestion • Remove thermostat suggestion • Atomic response • Atomic request Information available: • Local temperature • Outdoor temperature • Occupancy • Abs min heat setpoint limit • Abs max heat setpoint limit • Abs min cool setpoint limit • Abs max cool setpoint limit • Pi cooling demand • Pi heating demand • Hvac system type configuration • Local temperature calibration • Occupied cooling setpoint • Occupied heating setpoint • Unoccupied cooling setpoint • Unoccupied heating setpoint • Min heat setpoint limit • Max heat setpoint limit • Min cool setpoint limit • Max cool setpoint limit • Min setpoint dead band • Remote sensing • Control sequence of operation • System mode • Thermostat running mode • Start of week • Number of weekly transitions • Number of daily transitions • Temperature setpoint hold • Temperature setpoint hold duration • Thermostat programming operation mode • Thermostat running state • Setpoint change source • Setpoint change amount • Setpoint change source timestamp • Occupied setback • Occupied setback min • Occupied setback max • Unoccupied setback • Unoccupied setback min • Unoccupied setback max • Emergency heat delta • Ac type • Ac capacity • Ac refrigerant type • Ac compressor type • Ac error code • Ac louver position • Ac coil temperature • Ac capacityformat • Preset types • Schedule types • Number of presets • Number of schedules • Number of schedule transitions • Number of schedule transition per day • Active preset handle • Active schedule handle • Available temperature presets • Currently active preset • Setpoint hold expiry timestamp • Max thermostat suggestions • Thermostat suggestions • Current thermostat suggestion • Thermostat suggestion not following reason • Critical freeze protection • Critical overheat protection • Sensors • Available sensor handles • Enabled sensor handles • Number of sensor schedule transitions • Sensor schedule
▶ 💧 Humidity control	v1.1	✓
Fan Control What you can do: • Step Information available: • Current fan mode • Fan mode sequence • Percent setting • Percent current • Speed max • Speed setting • Speed current • Rock support • Rock setting • Wind support • Wind setting • Airflow direction

✨ Standout: Scheduling

⚠ Not available: Humidity sensor

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Thermostat Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

55%

Optional Not Implemented 6

Per the Matter spec, these clusters are optional. The device is compliant without them.

Thermostat User Interface Configuration Energy Preference Fan Control (client) Temperature Measurement (client) Relative Humidity Measurement (client) Occupancy Sensing (client)

Bonus Features Implemented 1

Groups

Extra (Beyond Spec) 5

Scenes On/Off Descriptor Fan Control Cluster 0x1334FC00

2/2 required | 1/7 optional

Endpoints by Version

Hardware: 0

SW: 1.0 Latest Seen 1 endpoint

Endpoint 0

Device Types

Server Clusters (hover for details)✓ Rich data

Hardware: 1

SW: 1.0 Latest Seen 1 endpoint

Endpoint 1

Device Types

Server Clusters (hover for details)✓ Rich data

Known Versions

Hardware Version	Software Version	Count	First Seen	Last Seen
1	1.0	50	2026-01-25 18:51:07	2026-04-29 23:35:16

« Back to device index

TCL Window AC (PID 0x22E1)

What This Device Can Do

What you can do:

Information available:

What you can do:

Information available:

What you can do:

Information available:

What you can do:

Information available:

What you can do:

Information available:

What you can do:

Information available:

What you can do:

Information available:

What you can do:

Information available:

Technical Details For developers

Device Compatibility

On/Off (36 devices)

Thermostat (4 devices)

Fan Control (2 devices)

Spec Compliance & Feature Analysis

Endpoints by Version

Hardware: 0

Endpoint 0

Descriptor

Access Control

Basic Information

Localization Configuration

Time Format Localization

Unit Localization

General Commissioning

Network Commissioning

Diagnostic Logs

General Diagnostics

Software Diagnostics

Wi-Fi Network Diagnostics

Administrator Commissioning

Operational Credentials

Group Key Management

Fixed Label

User Label

Hardware: 1

Endpoint 1

Identify

Groups

Scenes

On/Off

Descriptor

Thermostat

Fan Control

Cluster 322239488

Known Versions