The IKEA of Sweden LILJEBAGGE radiator thermostat is a Matter device (Vendor 0x117C, Product 0x5000) with 2 endpoints.

Last updated 26 Sep 2026

LILJEBAGGE radiator thermostat

★ ★ ★ ☆ ☆ (55%)

IKEA of Sweden

Vendor ID: 4476

Product ID: 20480

Seen: 4 times

No Binding Thread

What This Device Can Do

Climate

★ ★ ★ ☆ ☆ 36% of features

Controls
▶ 🌡️ Temperature setpoint	v1.0	✓
Thermostat What you can do: ✓ Raise or lower the target temperature ✓ Raise or lower the target temperature ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✓ Set active schedule request ✓ Set active preset request ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✓ Atomic request Information available: ✓ Current room temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✕ Abs min cool setpoint limit optional ✕ Abs max cool setpoint limit optional ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✕ Target cooling temperature optional ✓ Target heating temperature ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✕ Min cool setpoint limit optional ✕ Max cool setpoint limit optional ✕ Min setpoint dead band optional ✕ Remote sensing optional ✓ Control sequence of operation ✓ Current mode (heat/cool/auto/off) ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✕ Temperature setpoint hold optional ✕ Temperature setpoint hold duration optional ✓ Thermostat programming operation mode ✓ Thermostat running state ✓ Setpoint change source ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✓ Schedule types ✓ Number of presets ✓ Number of schedules ✓ Number of schedule transitions ✓ Number of schedule transition per day ✓ Active preset handle ✓ Active schedule handle ✓ Presets ✓ Schedules ✕ Setpoint hold expiry timestamp optional ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensor handles optional ✕ Enabled sensor handles optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating MatterScheduleConfiguration Presets
🌀 Fan speed control	v1.1	✕

Sensors
🌡️ Temperature sensor	v1.0	✕
💧 Humidity sensor	v1.0	✕

Automation & Scenes
▶ ⏰ Scheduling	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly temperature schedule optional ✕ Get current weekly schedule optional ✕ Get current weekly schedule optional ✕ Clear all scheduled settings optional ✓ Set active schedule request ✓ Set active preset request ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✓ Atomic request Information available: ✓ Local temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✕ Abs min cool setpoint limit optional ✕ Abs max cool setpoint limit optional ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✕ Occupied cooling setpoint optional ✓ Occupied heating setpoint ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✕ Min cool setpoint limit optional ✕ Max cool setpoint limit optional ✕ Min setpoint dead band optional ✕ Remote sensing optional ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Max schedule changes per day optional ✕ Max schedule transitions optional ✕ Number of daily transitions optional ✕ Temperature setpoint hold optional ✕ Temperature setpoint hold duration optional ✓ Thermostat programming operation mode ✓ Thermostat running state ✓ Setpoint change source ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✓ Schedule types ✓ Number of presets ✓ Number of schedules ✓ Number of schedule transitions ✓ Number of schedule transition per day ✓ Active preset handle ✓ Active schedule handle ✓ Presets ✓ Schedules ✕ Setpoint hold expiry timestamp optional ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensor handles optional ✕ Enabled sensor handles optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating MatterScheduleConfiguration Presets
🎬 Scenes & presets	v1.3	✕

Comfort & Climate
▶ 🔥 Heating	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✓ Set active schedule request ✓ Set active preset request ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✓ Atomic request Information available: ✓ Current room temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✕ Abs min cool setpoint limit optional ✕ Abs max cool setpoint limit optional ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✕ Occupied cooling setpoint optional ✓ Target heating temperature ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✕ Min cool setpoint limit optional ✕ Max cool setpoint limit optional ✕ Min setpoint dead band optional ✕ Remote sensing optional ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✕ Temperature setpoint hold optional ✕ Temperature setpoint hold duration optional ✓ Thermostat programming operation mode ✓ Thermostat running state ✓ Setpoint change source ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✓ Schedule types ✓ Number of presets ✓ Number of schedules ✓ Number of schedule transitions ✓ Number of schedule transition per day ✓ Active preset handle ✓ Active schedule handle ✓ Presets ✓ Schedules ✕ Setpoint hold expiry timestamp optional ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensor handles optional ✕ Enabled sensor handles optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating MatterScheduleConfiguration Presets
▶ 📌 Temperature presets	v1.0	✓
Thermostat What you can do: ✓ Setpoint raise lower ✓ Get weekly schedule response ✕ Set weekly schedule optional ✕ Get weekly schedule optional ✕ Add thermostat suggestion response optional ✕ Clear weekly schedule optional ✓ Set active schedule request ✓ Set active preset request ✕ Add thermostat suggestion optional ✕ Remove thermostat suggestion optional ✕ Atomic response optional ✓ Atomic request Information available: ✓ Local temperature ✕ Outdoor temperature optional ✕ Occupancy optional ✓ Abs min heat setpoint limit ✓ Abs max heat setpoint limit ✕ Abs min cool setpoint limit optional ✕ Abs max cool setpoint limit optional ✕ Pi cooling demand optional ✕ Pi heating demand optional ✕ Hvac system type configuration optional ✓ Local temperature calibration ✕ Occupied cooling setpoint optional ✓ Occupied heating setpoint ✕ Unoccupied cooling setpoint optional ✕ Unoccupied heating setpoint optional ✓ Min heat setpoint limit ✓ Max heat setpoint limit ✕ Min cool setpoint limit optional ✕ Max cool setpoint limit optional ✕ Min setpoint dead band optional ✕ Remote sensing optional ✓ Control sequence of operation ✓ System mode ✕ Thermostat running mode optional ✕ Start of week optional ✕ Number of weekly transitions optional ✕ Number of daily transitions optional ✕ Temperature setpoint hold optional ✕ Temperature setpoint hold duration optional ✓ Thermostat programming operation mode ✓ Thermostat running state ✓ Setpoint change source ✕ Setpoint change amount optional ✕ Setpoint change source timestamp optional ✕ Occupied setback optional ✕ Occupied setback min optional ✕ Occupied setback max optional ✕ Unoccupied setback optional ✕ Unoccupied setback min optional ✕ Unoccupied setback max optional ✕ Emergency heat delta optional ✕ Ac type optional ✕ Ac capacity optional ✕ Ac refrigerant type optional ✕ Ac compressor type optional ✕ Ac error code optional ✕ Ac louver position optional ✕ Ac coil temperature optional ✕ Ac capacityformat optional ✓ Preset types ✓ Schedule types ✓ Number of presets ✓ Number of schedules ✓ Number of schedule transitions ✓ Number of schedule transition per day ✓ Active preset handle ✓ Active schedule handle ✓ Available temperature presets ✓ Currently active preset ✕ Setpoint hold expiry timestamp optional ✕ Max thermostat suggestions optional ✕ Thermostat suggestions optional ✕ Current thermostat suggestion optional ✕ Thermostat suggestion not following reason optional ✕ Critical freeze protection optional ✕ Critical overheat protection optional ✕ Sensors optional ✕ Available sensor handles optional ✕ Enabled sensor handles optional ✕ Number of sensor schedule transitions optional ✕ Sensor schedule optional Enabled features: Heating MatterScheduleConfiguration Presets
❄️ Cooling	v1.0	✕
🔄 Auto heat/cool	v1.0	✕
💧 Humidity control	v1.1	✕

✨ Standout: Scheduling

⚠ Not available: Humidity sensor

Setup & Reset Info

▼

Setup: Power Cycle Reset: Power Cycle

Technical Details For developers

▼

Device Compatibility

Can provide data to: These devices have client clusters that can read from or control this device's server clusters

Thermostat (3 devices)

Aqara Climate Sensor W100 (Aqara) Eve Thermo Control (Eve Systems) Touchscreen Switch S100 (Aqara)

Spec Compliance & Feature Analysis

Comparing this device's clusters against Matter specification requirements. Shows what's implemented, what's missing, and bonus features. Note: Legacy clusters (e.g., Scenes) count as compliant when replaced by newer equivalents (Scenes Management).

Thermostat Matter 1.0 Compliant

★ ★ ★ ☆ ☆ Feature Score:

55%

Optional Not Implemented 6

Per the Matter spec, these clusters are optional. The device is compliant without them.

Groups Energy Preference Fan Control (client) Temperature Measurement (client) Relative Humidity Measurement (client) Occupancy Sensing (client)

Bonus Features Implemented 1

Thermostat User Interface Configuration

Extra (Beyond Spec) 2

Descriptor Cluster 0x117CFC01

2/2 required | 1/7 optional

Endpoints by Version

Hardware: P2.3

SW: 1.1.0 Latest Seen 2 endpoints

Endpoint 0

Device Types

Server Clusters (hover for details)✓ Rich data

Client Clusters (hover for details)

Endpoint 1

Device Types

Server Clusters (hover for details)✓ Rich data

Known Versions

Hardware Version	Software Version	Count	First Seen	Last Seen
P2.3	1.1.0	4	2026-09-25 10:18:01	2026-09-26 10:18:08

« Back to device index

LILJEBAGGE radiator thermostat

What This Device Can Do

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

What you can do:

Information available:

Enabled features:

Setup & Reset Info

Technical Details For developers

Device Compatibility

Thermostat (3 devices)

Spec Compliance & Feature Analysis

Endpoints by Version

Hardware: P2.3

Endpoint 0

Descriptor

Access Control

Basic Information

OTA Software Update Requestor

Time Format Localization

Unit Localization

Power Source

General Commissioning

Network Commissioning

General Diagnostics

Thread Network Diagnostics

Time Synchronization

Administrator Commissioning

Operational Credentials

Group Key Management

ICD Management

OTA Software Update Provider

Endpoint 1

Identify

Descriptor

Thermostat

Thermostat User Interface Configuration

Cluster 293403649

Known Versions